Appendices
Changing the Target Device Settings After Making Connection Settings
If you change the IP address, model, or revision of the target device after making the connection
settings, you must also change the target device settings that are included in the connection set-
tings. You can change the target device settings entirely.
Changing the IP Addresses for All Target Devices
1
Right-click one of the connection lines and select Change Node Address from the menu.
2
The Node Address Change Dialog Box is displayed. Enter a new IP address in New IP address.
3
To apply the same change to other connections, select the Apply the change to other connec-
tions Check Box.
4
Click the OK Button.
A-22
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)