Tcp/Ip Settings Display - Omron NY532-5400 User Manual

5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-1

TCP/IP Settings Display

 IP Address - EtherNet/IP Port
Setting
IP address setting
method
*2
IP address
*2
Subnet mask
*1 These settings are required if you set IP address setting method to Fixed setting.
*2 Refer to 4-2 Controller IP Address Settings for details on setting IP addresses.
 IP Address - Internal Port
Setting
IP address
*1
Subnet mask
*1 Refer to 2-1-4 Precautions for Ethernet Switch Selection for details on setting IP addresses.
Precautions for Correct Use Precautions for Correct Use
You cannot set IP addresses that make the built-in EtherNet/IP port and the internal port belong
to the same network.
5-2
Description
Select one of the following IP address setting methods for
the built-in EtherNet/IP port.
• Fixed setting
• Obtain from BOOTP server.
• Fix at the IP address obtained from BOOTP server.
Set the IP address for the built-in EtherNet/IP port.
Set the subnet mask for the built-in EtherNet/IP port.
Set the IP address for the internal port.
Set the subnet mask for the internal port.
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
*3
Description
*1
Default
Fixed setting
Built-in EtherNet/IP port
1: 192.168.250.1
Built-in EtherNet/IP port
2: 192.168.251.1
255.255.255.0
Default
192.168.254.1
255.255.255.0