Omron NY532-5400 User Manual page 241

 Instance Attribute ID
The instance attribute ID specifies the attribute of the instance.
Attribute ID Parameter name
01 hex Interface Configuration
Status
02 hex Configuration Capability
03 hex Configuration Control
04 hex Physical Link Object
Path size
Path
05 hex Interface Configuration
IP Address
Network Mask
Gateway Address
Nama Server
Nama Server2
Domain Name
06 hex Host Name
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Description
Indicates the IP address settings
status of the interface.
Indicates a Controller Configura-
tions and Setup that can be set to
the interface.
Sets the method used to set the
IP address when the interface
starts.
The path to the link object in the
physical layer.
The path size (WORD size).
The path to the link object in the
physical layer (static).
The interface settings.
IP address.
Subnet mask.
The default gateway.
The primary name server.
The secondary name server.
The domain name.
The host name (reserved).
8 CIP Message Communications
Read/write data
Attribute
Data
type
Read DWORD Bits 0 to 3: Interface Configura-
tion Status:
0 = IP address is not set.
(This includes when BOOTP
is starting.)
1 = IP address is set.
Bits 4 and 5: Reserved (always
FALSE).
Bit 6: AcdStatus:
FALSE = IP address colli-
sions have not been
detected.
TRUE = IP address collisions
have been detected.
Bits 7 to 31: Reserved (always
FALSE).
Read DWORD Bit 0: BOOTP Client:
FALSE = Internal port
TRUE = Built-in EtherNet/IP port
Bit 1: DNS Client: Always TRUE.
Bit 2: DHCP Client: Always
FALSE.
Bit 3: DHCP-DNS Update: Always
FALSE.
Bit 4: Configuration Settable:
Always TRUE.
Bit 5: Hardware Configurable:
Always FALSE.
Bit 6: Interface Configuration
Change Requires Reset: Always
FALSE.
Bit 7: ACD Capable: Always
TRUE.
Bits 8 to 31: Reserved (always
FALSE).
Write DWORD Bit 0: Static IP address.
Bit 1: Set by BOOTP.
Read Struct ---
UINT 0002 hex
EPATH 20 F6 24 02 hex = Internal port
20 F6 24 01 hex = Built-in Ether-
Net/IP port
Write Struct ---
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
STRING Set value
Write STRING Always 0000 hex.
Value
8
8-45