Omron NY532-5400 User Manual page 304

10 FTP Server
 Function
• Specifies the file data type.
• The following data types are supported:
ascii: Files are transferred as ASCII data.
binary (image): Files are transferred as binary data. The Controller handles binary files. Use the
type command to specify binary transfers before you upload or download files. File contents can-
not be guaranteed if transferred as ASCII data.
• The default file type is ASCII.
get
 Format
get file_name [receive_file_name]
 Function
• Transfers the specified remote file from the Virtual SD Memory Card to the local host.
• A receive file name can be used to specify the name of the file in the local host.
mget
 Format
mget file_name
 Function
• You can include wildcards (*) in the file name to transfer multiple remote files from the Virtual SD
Memory Card to the local host.
put
 Format
put file_name [destination_file_name]
 Function
• Transfers the specified local file to the remote host (to the Virtual SD Memory Card).
• You can specify the destination file name to specify the name the file is stored under on the Virtual
SD Memory Card.
• Any existing file with the same name in the remote host (on the Virtual SD Memory Card) is over-
written by the contents of the transferred file.
mput
 Format
mput file_name
 Function
• You can include wildcards (*) in the file name to transfer multiple local files to the remote host (to
the Virtual SD Memory Card).
10-14
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)