Cip Object Services; Cip Objects Sent To The Built-In Ethernet/Ip Port; Identity Object (Class Id: 01 Hex) - Omron NY532-5400 User Manual

8 CIP Message Communications
8-5

CIP Object Services

This section shows services that specify the CIP object in the Request Path and access the CIP mes-
sage server function of the NY-series Controllers.
8-5-1

CIP Objects Sent to the Built-in EtherNet/IP Port

The following CIP objects can be sent to an EtherNet/IP port.
Object name
Identity object
TCP/IP interface object
Ethernet link object
Controller object
8-5-2

Identity Object (Class ID: 01 Hex)

This object reads the ID information of the Controller and resets the built-in EtherNet/IP port and inter-
nal port.
Service Codes
Specify the service to execute with the service code.
Service
Parameter name
code
01 hex Get_Attribute_All
0E hex Get_Attribute_Single
05 hex Reset
Class ID
Specify 01 hex.
Instance ID
Specify 00 or 01 hex.
Attribute ID
The attribute ID specifies the information to read.
8-40
• Reads ID information from the Controller.
• Resets the built-in EtherNet/IP port and internal port.
• Writes and reads TCP/IP settings.
• Reads Ethernet settings.
• Reads Ethernet status.
• Gets the Controller status.
• Changes the operating mode of the Controller.
Description
Reads the values of the attributes.
Reads the value of the specified attribute.
Resets the built-in EtherNet/IP port and internal port. This parame-
ter is used to reset the port when you change the IP address or
other parameter settings and want to apply them. Input one of the
following values for the ServiceDat input variable to the CIPSend
instruction to specify the reset method.
00 hex: Resets the port.
02 hex: Clears the saved tag data link settings and resets the
port.
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Function
Classes
Supported.
Supported.
Not sup-
Reference
page 8-40
page 8-44
page 8-47
page 8-52
Supported services
Instances
Supported.
Supported.
Supported.
ported.