Omron NY532-5400 User Manual page 143

13
To edit a registered tag set and add tags, either double-click the tag set, or select the tag set
and click the Edit Button. The Edit Tag Set Dialog Box is displayed.
The Tag List on the left side of the dialog box shows the tags that are already registered, and
the Candidate Tag List on the right side of the dialog box shows the other tags that are not reg-
istered yet. To add a tag, select it in the Candidate Tag List and click the
14
To include the Controller status in the tag set, select the Include Option at the upper-right corner
of the dialog box.
15
To confirm a change, click the OK Button in the Edit Tag Set Dialog Box.
16
Click the OK Button in the Edit Device Parameters Dialog Box.
17
If you want to just add new tags and register the tag set, first register the tags with steps 1 to 9.
In this example, input tags Var_In_e, Var_In_f are newly added.
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
7 Tag Data Link Functions
Button.
7
7-27