Recognition 1
Setting
Recognition method
IP address
Host name
Community name
Recognition 2
Setting
Recognition 2
Recognition method
IP address
Host name
Community name
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
Description
Set the method to use to specify SNMP managers for which
access is permitted.
• IP address
• Host name
Make these settings to permit access by only certain SNMP
managers. Access is not allowed unless an IP address or host
name is set.
Set the IP address of the SNMP manager. If the default setting
of 0.0.0.0 is used, access is permitted from all SNMP manag-
ers. (Set this setting if the recognition method in the recognition
1 settings is set to the IP address Option.)
Set the host name of the SNMP manager. (Set this setting if
the recognition method in the recognition 1 settings is set to
the Host name Option.) (You can use up to 200 single-byte
alphanumeric characters, dots, and hyphens with up to 63 sin-
gle-byte alphanumeric characters between dots.)
Set the community name to enable the SNMP manager to
access information from the built-in EtherNet/IP port. (Single-
byte alphanumeric characters, dots, and hyphens: 255 charac-
ters max.)
Description
Specify whether to use the recognition 2 settings.
• Use.
• Do not use.
Set the method to use to specify SNMP managers for which
access is permitted.
• IP address
• Host name
Make these settings to permit access by only certain SNMP
managers. Access is not allowed unless an IP address or host
name is set.
Set the IP address of the SNMP manager. If the default setting
of 0.0.0.0 is used, access is permitted from all SNMP manag-
ers. (Set this setting if the recognition method in the recognition
2 settings is set to the IP address Option.)
Set the host name of the SNMP manager. (Set this setting if
the recognition method in the recognition 2 settings is set to
the Host name Option.) (You can use up to 200 single-byte
alphanumeric characters, dots, and hyphens with up to 63 sin-
gle-byte alphanumeric characters between dots.)
Set the community name to enable the SNMP manager to
access information from the built-in EtherNet/IP port. (Single-
byte alphanumeric characters, dots, and hyphens: 255 charac-
ters max.)
Default
IP address
None
None
public
5
Default
Do not use.
IP address
None
None
public
5-9