4 Determining IP Addresses
Connecting from a Saved Project
The connection configuration that is set (EtherNet/IP) is saved in the project. (The file is xxx.smc.) If
you open a saved project on the Sysmac Studio, you can connect to the EtherNet/IP network without
redoing the settings.
4-2-4
Checking the Current IP Address
The current IP address can be confirmed in the Controller Status Pane of the Sysmac Studio either
when it is set manually or obtained from the BOOTP server.
• Basic Controller Status Pane
Additional Information
• If you obtain the IP address from the BOOTP server, you can check the obtained IP address
by synchronizing and uploading the controller settings from the Sysmac Studio.
• If the IP address of the built-in EtherNet/IP port is not registered due to the following reasons,
the IP address field shows "0.0.0.0".
• The IP address was not obtained from the BOOTP server.
4-10
• Controller Status Pane with Details
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)