Clearing The Device Parameters - Omron NY532-5400 User Manual

7 Tag Data Link Functions
Starting and Stopping Tag Data Links for Individual Devices
 Using the Network Configurator
You can start and stop tag data links for individual devices using the Connection Tab Page in the
Monitor Device Dialog Box. This applies only to tag data links for which the device is the originator.
Select Monitor from the Device Menu to access the Monitor Device Dialog Box. When using an NX-
series CPU Unit, you can individually start and stop the tag data links of the built-in EtherNet/IP
ports 1 and 2 connected to the Network Configurator.
Start Connection Button:
Starts all connections for which the device is the originator.
Stop Connection Button:
Stops all connections for which the device is the originator.

7-2-13 Clearing the Device Parameters

You can clear the tag data link settings (or return them to their factory settings) that are saved in the
registered EtherNet/IP device. The following procedure shows how to clear the tag data link settings.
For details on how to connect to the network from the Network Configurator, refer to 7-2-8 Connecting
the Network Configurator to the Network.
1
Connect the Network Configurator online.
2
Select the icon of the device from which you want to clear the device parameters. In the follow-
ing example, 2 nodes are selected: 192.168.250.1 and 192.168.250.2. To select multiple nodes,
press and hold the Shift Key while you select additional icons.
7-64
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)