Omron NY532-5400 User Manual page 35

*6 The built-in EtherNet/IP port uses the TCP/UDP port numbers shown in the following table.
Do not set the same port number for more than one TCP/UDP service.
Service
EIP data links
Used by system
CIP messages
FTP client data transfer port
DNS client
BOOTP client
HTTP server
Used by system, other
FTP client control port
SNMP agent
SNMP trap
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Protocol Port number
UDP 2222
UDP 2223, 2224
TCP 9610
TCP 9900
TCP 44818
TCP 20
TCP/UDP 53
UDP 68
TCP 80
TCP/UDP 9600
TCP 21
UDP 161
UDP 162
1 Introduction
Remarks
Fixed values
You can change the port number in
the Unit Settings on the Sysmac
Studio.
1
1-9