Omron NY532-5400 User Manual page 412

Appendices
 Calculation Example for Bandwidth Used (PPS) for Each Device by the
EtherNet/IP Connections
Establishing following three EtherNet/IP connections between Controllers (1) to (3) in the Ether-
Net/IP network
Connection type
Connection (1)
Connection (2)
Connection (3)
NJ-series Controller 3
(192.168.250.3)
Bandwidth used (PPS) for each EtherNet/IP device is as given below.
A-26
Relevant devices in the EtherNet/IP connections
NJ-series Controller 2 (target device)
to NY-series Controller 1 (originator device)
NY-series Controller 1 (target device)
to NJ-series Controller 2 (originator device)
NJ-series Controller 3 (target device)
to NY-series Controller 1 (originator device)
EtherNet/IP network
Connection (3)
NY-series Controller 1
(192.168.250.1)
EtherNet/IP connection settings for Controller 1
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
Connection (1)
Connection (2)
NJ-series Controller 2
(192.168.250.2)
Connection (1)
Connection (3)
Device bandwidth
usage (PPS)
50 pps
10 pps
210 pps