Omron NY532-5400 User Manual page 111

 Trap 1
Setting
Specifying method
IP address
Host name
Community name
Version
 Trap 2
Setting
Trap 2
Specifying method
IP address
Host name
Community name
Version
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User's Manual (W563)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
Description
Set the specifying method for the SNMP manager destination
for SNMP traps.
• IP address
• Host name
Set the IP address of the SNMP manager. (Set this setting if
the specifying method in the trap 1 settings is set to the IP
address Option.)
Set the host name of the SNMP manager. (Set this setting if
the specifying method in the trap 1 settings is set to the Host
name Option.) (You can use up to 200 single-byte alphanu-
meric characters, dots, and hyphens with up to 63 single-byte
alphanumeric characters between dots.)
Set the community name. (You can use up to 255 single-byte
alphanumeric characters.)
Set the version of the SNMP manager.
• SNMP version 1: SNMPv1
• SNMP version 2C: SNMPv2C
Description
Specify whether to use the trap 2 settings.
• Use.
• Do not use.
Set the specifying method for the SNMP manager destination
for SNMP traps.
• IP address
• Host name
Set the IP address of the SNMP manager. (Set this setting if
the specifying method in the trap 2 settings is set to the IP
address Option.)
Set the host name of the SNMP manager. (Set this setting if
the specifying method in the trap 2 settings is set to the Host
name Option.) (You can use up to 200 single-byte alphanu-
meric characters, dots, and hyphens with up to 63 single-byte
alphanumeric characters between dots.)
Set the community name. (You can use up to 255 single-byte
alphanumeric characters.)
Set the version of the SNMP manager.
• SNMP version 1: SNMPv1
• SNMP version 2C: SNMPv2C
Default
IP address
None
None
public
SNMPv1
5
Default
Do not use.
IP address
None
None
public
SNMPv1
5-11