7.1.3
Installing multiple extension units in layers
This section describes how to install another extension units on the extension units that has been installed
on the GOT.
When no extension units is installed on the GOT, apply the steps in this section after installing an extension
units.
• Option unit (
• Communication unit (
1
Remove the connector cover and sticker from the installed extension units.
2
Install the unit on the unit that has been installed.
3
After installing the unit, fasten it by tightening the mounting screws (2 places) with tightening torque of
0.36 to 0.48N·m.
7
7.1 Communication Unit
- 13
7.1.3 Installing multiple extension units in layers
7.2.2 Installing procedure)
7.1.2 Installing procedure)
Connector cover
Sticker