Mitsubishi Electric GT1695M-XTBD User Manual page 147

(4) Operation setting by GT Designer2
Carry out the setting of clock setting in [GOT set up] in [System Environment] of
GT Designer2.
To change a part of the setting after downloading the project data, change the
setting at the display setting of GOT.
(2) Clock display
Carry out the display and seting of GOT clock data.
The setup methods of clock data are shown below.
Key
Input numeric value in cursor position.
to
0 9
Move the cursor.
/
Move the cursor to the left by one character when
month, day, time, minutes, seconds.
Del
Carry out nothing when touched other than when inputting the above.
Close the keyboard after the input time is displayed in clock display.
The update of the clock display does not restart even if the keyboard is closed.
Enter
The update of the clock display restarts with the operation of
Cancel the input time and returns the time of clock display to the time at which the keyboard
was displayed and close the keyboard.
The update of the clock display does not restart even if the keyboard is closed.
Cancel
The update of the clock display restarts with the operation of
GT Designer2 Version
(3.8 Setting of GOT Display and Operation (GOT Setup))
Description
9.1 GOT Main Unit Function Settings
Screen Design Manual
1 If touch the clock display section, the
keyboard for input is displayed and the
clock update stops.
2 Input time with the keyboard by referring to
the table below. Input the scheduled time
when the operation of
out since the input time is reflected at the
time of the operation of
The day of the week is displayed
automatically according to the input date.
The effective range of clock setting is as
follows.
Jan. 1, 2000 to Dec. 31, 2037
Key is touched while inputting year,
Del
.
.
9.1.1 Time setting
9
10
11
is to be carried
12
.
13
14
15
16
9
- 5