Locking the utility display by password
When you try to display the utility main menu while the password is set to the GOT
by GT Designer2, the display for password input will be appeared.
(The password setting of GT Designer2 is in the common menu.)
When the password is not matched, displays the error message.
(1) Input operation of password
1)Input the password after touching
2)Define the password by touching
3)To correct the input character, touch
and reinput/retype the new character.
(2) Password input cancel operation
Refer to the following for the details related to the password setting.
GT Designer2 Version
, the screen returns to the monitor screen.
button is touched, it returns to the monitor screen.
Screen Design Manual
8.3.1 Display operation of main menu
key, after password input.
key to delete the correcting character
8.3 Utility Display