Mitsubishi Electric GT1695M-XTBD User Manual page 119

Precautions for removing the CF card
1. While the CF card access LED is on, do not install/remove the CF card or power
off the GOT.
To do so may cause data corruption or malfunction.
2. When ejecting the CF card, support it by hand since it may pop out.
Failure to do so may cause a fall of the CF card leading to failure or damage of
the card.
(2) CF card inserting/removing method with multimedia unit or CF card unit
(a) Installing
1 Open the CF card cover and turn off the CF card access switch of the unit.
When using the multimedia unit
2 Insert the CF card into the CF card connector with the face out.
When using the multimedia unit
3 Turn on the CF card access switch.
(b) Removal
1 Open the CF card cover.
Turn off the CF card access switch of the unit and check that the CF card access LED turns off.
(When the LED turns off, the CF card can be removed even while the GOT is on.)
When using the multimedia unit
When using the CF card unit
When using the CF card unit
When using the CF card unit
7.3 Option
7.3.2 Installation procedure
1
2
3
4
5
6
7
8
7
- 36