Error Message And System Alarm - Mitsubishi Electric GT1695M-XTBD User Manual

16.3 Error Message and System Alarm

This chapter describes the error message and system alarm displayed in the GOT.
As the error code and error message displaying functions when an error occurs at the GOT, controller or
network, there are two kinds: system alarm and advanced system alarm.
For details of the system alarm and advanced system alarm, refer to the following.
Remark
16.3.1 Error contents display
This section describes the example for displaying error code and error message on GOT.
1 Popup-displaying the error code and error message (Advanced alarm popup display
(System alarm))
If an error occurs, the error code and error message can be popup-displayed on the front of the monitor
screen.
As alarms are popup-displayed regardless of the screen type, the error occurred will not be overlooked.
2 Displaying error code and error message in a list (Advanced system alarm display)
If error has occurred, error code and error message can be displayed on the list set with the screen.
Multiple errors can be displayed, or the history of display can be recorded.
16
16.3 Error Message and System Alarm
- 17
16.3.1 Error contents display
GT Designer2 Version
Error code and channel No.
• Error codes can also be confirmed in the error code storage area of the
system information function.
• The channel No. where an error is occurring can be confirmed with the GOT
special register (GS262 to 264).
For details of the system information and GOT special register, refer to the following
manual.
GT Designer2 Version
Occurred
04/6/1
04/6/1
Create a screen to display alarms, and confirm
the details of the alarms and take measures.
Screen Design Manual
Screen Design Manual
A 1254 A 1254
B 348 B 348
04/6/1 13:20 Power module
Pop up generated alarms
regardless of the screen.
Message Restore Check
10:25 Temp. error
8:05 Fuse error
11:25 10:45