Mitsubishi Electric GT1695M-XTBD User Manual page 118

3 Close the cover of the CF card interface. Set the CF card access switch to ON.
(b) Removing
1 Set the CF card access switch of the GOT to OFF, and make sure that the CF card access LED
turns off. (When the CF card access LED turns off, the CF card can be removead even during the
GOT power on.)
2 Open the cover of the CF card interface.
Push the CF card eject button of the GOT.
(The CF card eject button is pulled out after pushing at once.)
3 Push the CF card eject button of the GOT to lift the CF card and remove it.
7
7.3 Option
- 35
7.3.2 Installation procedure
ACCESS
OFF ON
ACCESS
OFF ON