Got Operation; Summary Of Operation - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

2.

GOT operation

GOT enables reading and writing to PLC CPU devices (bit, word) with the switches, lamp, numerical display/input,
message display, etc. on the GOT screen.

2.1 Summary of operation

With GT Designer3, display pane figures called objects, such as the touch switch, lamp, and numerical display, etc., are
pasted on the GOT screen.
GOT functions can be executed by setting operation functions of the PLC CPU device memory (bit, word) to each pasted
object.
This chapter explains the GOT operation in connection with the PLC CPU when the touch switch or numerical display
are set as shown below.
<System example>
PLC CPU
Ethernet connection cable
GOT
Run Stop
Data
Sequence program
M0 M1 Y10
Y10
Y10
MOV K123 D10
Run lamp
123
<Settings of GOT for figures>
Touch switch setting
Bit momentary
Write device : M0
Touch switch setting
Bit momentary
Write device : M1
Lamp display setting
Bit
Read device : Y10
Numerical input setting
Write device : D10, unsigned BIN
Display
: Unsigned decimal number
2. GOT operation
2.1 Summary of operation
1
2
3
4
5
6
2 - 1