9.3 Operation Settings (Settings Regarding Operation)
9.3.5 Utility call key setting
Precautions on using the advanced alarm popup display
When [Display Position Switching] is set to [Switch] in the advanced alarm popup
display setting, set either of the following for the utility call key.
• Setting the position of the utility call key to the upper-right or lower-left
• Setting [Pressing Time] of the utility call key to 1 or more seconds
When [Pressing Time] is set to 0 and the key position is set to the lower-left corner,
the operation is as described below.
If the positions of the key and the advanced alarm popup display overlap, the utility
screen appears by switching the display position of the advanced alarm popup
For the advanced alarm popup display, refer to the following.
GT Designer2 Version
(8.5 Advanced Alarm Popup Display)
Screen Design Manual