Got Restoration Sheet - Mitsubishi Electric GT1695M-XTBD User Manual

16. TROUBLESHOOTING
This chapter explains the GOT restoration sheet, troubleshooting in the bus connection, and the error
message/system alarm list.

16.1 GOT Restoration Sheet

This section provides restoration methods for the case the GOT does not operate normally, which are listed
in check sheets.
The following explains how to use each sheet.
(1) When the GOT does not operate or malfunctions (GOT status check sheet)
When the GOT does not operate or malfunctions, identify the cause of the malfunction etc. with
GOT status check sheet and take corrective action.
When the GOT is restored, see the status for a while.
(2) When the wiring status needs to be improved (GOT installation status check sheet)
When the noise caused by the GOT wiring status is considered to have caused the malfunction,
etc. based on the check result of (1) above, take corrective action for wiring using
installation status check sheet.
When the GOT is restored, see the status for a while.
(3) When corrective action other than (1) and (2) above is required (System configuration check sheet)
If malfunction etc. occurs even after checking with (1) and (2) above, please contact your local
Mitsubishi (Electric System) Service after filling out
details about your system.
When sending a troubled product, attach the GOT restoration sheets (
GOT installation status check sheet,
section.
Please keep copies of the restoration sheets.
16
16.1 GOT Restoration Sheet
- 1
System configuration check sheet with
System configuration check sheet) checked in this
GOT
GOT status check sheet,