Other Equipments Connected To The Main Unit - Mitsubishi Electric GT1695M-XTBD User Manual

7.5 Other Equipments Connected to the Main Unit

This section shows the equipments that can be connected to the GOT.
To connect a connectable equipment to the GOT, make Communication Settings for communications with an
equipment.
For details of connection, refer to the following manual.
7.5.1 Applicable other equipments connected to the main unit
The following equipments are applicable for GT16
Product name
USB memory
Bar code reader
RFID controller
*1 Some models with the operations checked by our company are usable.
For the operation-checked models, refer to "List of valid devices applicable for GOT1000 series" (T10-0039)
separately available.
The Technical News above is available as a reference at the information site for Mitsubishi industrial automation
products MELFANSweb home page.
(MELFANSweb website: http://wwwf2.mitsubishielectric.co.jp/english/index.html)
7.5.2 Installation procedure
This section describes how to install an equipment that can be used on the GOT.
To connect a bar code reader or RFID controller, make Communication Settings for communications with a
bar code reader or RFID controller.
For details of connection, refer to the following manual.
1 USB memory
Open the USB environmental protection cover and firmly insert a USB memory to the USB interface so
that the GOT automatically recognizes the USB memory.
For how to remove the USB memory, refer to the following.
7
7.5 Other Equipments Connected to the Main Unit
- 47
7.5.1 Applicable other equipments connected to the main unit
GOT1000 Series Connection Manual
Model
-
Commercially-available USB memory
-
Commercially-available bar code reader
-
Commercially-available RFID controller
GOT1000 Series Connection Manual
11.3.7 USB device status display
.
Description
*1
*1
*1