Mitsubishi Electric GT1695M-XTBD User Manual page 146

9
9.1 GOT Main Unit Function Settings
- 4
9.1.1 Time setting
(1) When connecting to an external device which does not have clock function
If set to [Adjust] or [Broadcast] for clock setting while the GOT is connected to
external devices (PLC or microcomputers) which do not have clock function, the
clock data will not be adjusted.
Refer to the following for the list of PLC installed with clock function.
GT Designer2 Version
(2.5.3 PLC CPUs with clock function)
(2) Clock setting when using the multi-channel function
The channel No. of a controller whose clock is used as a base or adjusted cannot
be set by the utility.
The controller whose clock is used as a base or adjusted can be set by GT
Designer2.
For channel settings, refer to the following.
GT Designer2 Version
(2.5.1 Synchronizing clock data between GOT and PLC CPU)
(3) Setting of clock setting and battery
The battery is not installed in GOT at purchase. When select [Broadcast] or
[None] in clock setting, set the clock of the GOT once with installing the optional
battery to the GOT.
1 If touch the setup item, the setup contents
is changed.
Adjust
Broadcast
Adjust/Broadcast
None
2 If touch button, the setup contents
OK
is reflected.
3 If touch button without touching
button, the dialog box mentioned
OK
left is displayed.
4 If touch button, GOT restarts. After
restart, GOT operates with the changed
settings.
Screen Design Manual
Screen Design Manual