(2) When installing with USB memory
Install the USB memory in which BootOS, standard monitor OS or project data is stored in the CF
card interface of GOT.
Display the data control function screen (Utility) on the GOT, and install BootOS, standard
monitor OS from the USB drive to GOT.
The USB memory access LED is lit during install execution.
Do not pull out the CF card or power OFF the GOT while the USB memory access LED is lit.
GOT restarts automatically after installation is completed.
After confirming normal restart, confirm that the USB memory access LED is not lit.
Display the USB device status screen and remove the USB memory from the USB interface of
14.3 BootOS and Standard Monitor OS Installation Using CF Card or
11.3.7 USB device status display