BootOS, standard monitor OS is installed in the built-in flash memory.
The CF card access LED is lit during install execution.
Do not pull out the CF card or power OFF the GOT while the CF card access LED is lit.
GOT restarts automatically after installation is completed.
(When standard monitor OS is already installed, GOT restarts by touching
After confirming normal restart, switch OFF the CF card access switch of GOT. When it is confirmed that
CF card access LED is not lit, remove the CF card from the CF card interface of GOT.
14.3.2 Installing using the data control function (Utility)
For details of data control function, refer to the following.
(1) When installing with CF card
Power OFF the GOT. After CF card access LED is off, install the CF card in which BootOS,
standard monitor OS or project data is stored in the CF card interface of GOT.
Switch ON the CF card access switch of GOT.
14.3 BootOS and Standard Monitor OS Installation Using CF Card or
Now installing BootOS.
13. DATA CONTROL
Precautions on executing data control function
When execute data control function, standard monitor OS has to be installed in GOT
in advance. Thus, this function cannot be used for the initial installation of BootOS,
standard monitor OS after purchasing GOT.
Install standard monitor OS by the following two methods.
(1) GT Designer2
(2) Installing when starting the GOT