Install Capillary Connections - Agilent Technologies 1260Infinity II Bio-inert FractionCollector User Manual

4
Preparing the Fraction Collector

Install Capillary Connections

Install Capillary Connections

For correct installation of capillary connections of the sampler it's important
to choose the correct fittings, see
Parts required p/n
5067-4650
5067-4651
5067-4720
5067-4722
5065-4454
The capillaries mentioned above are examples only.
1
Select a nut that is long enough for the fitting you'll be
using.
70
Description
Capillary ST 0.12 mm x 150 mm SL/SX
Capillary ST 0.12 mm x 280 mm SL/SX
Capillary ST 0.17 mm x 150 mm SL/SX
Capillary ST 0.17 mm x 280 mm SL/SX
Fitting screw long
10/pk
Quantity depends on configuration of the module (number of connections to
the multisampler).
2
1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual
"Capillary Color Coding Guide"
Slide the nut over the end of the tubing.
on page 69.