Agilent Technologies 1260Infinity II Bio-inert FractionCollector User Manual page 38

3
Using the Module
Configuration and Operation of the Fraction Collector
Finalize Calibration
The Finalize Calibration page of the Delay Calibration Wizard leads you through the
clean-up of the instrument back to its pre-calibration state.
The required clean-up steps are listed in a three-column table:
Activity
Status
Info
Start Clean-Up Procedure
Back
Cancel
Finish
Delay Calibration - Close
This dialog box is displayed when you click Cancel after the delay calibration
preparation procedure has been started. It allows you to select the action to
take when the calibration procedure is canceled:
Perform Finalize Calibration
Cancel Calibration
Continue Calibration
38
A short description of the preparation activity.
The current status of the preparation activity. When the activity
is complete, the status is Done.
Any additional information about the activity, for example, user
interaction.
Click to start the clean-up of the instrument; follow any
on-screen instructions that appear during the process.
Displays the Perform Calibration Run page of the Delay
Calibration Wizard
Displays the
Closes the Delay Calibration Wizard.
This button is not displayed until the clean-up is complete.
Carries out the clean-up steps required to bring the instrument
back to its original state.
This is the recommended action.
Aborts the calibration immediately.
If you select this option, the instrument may not be in a
usable state.
Continues with the delay calibration procedure.
1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual
("Perform Calibration Run"
"Delay Calibration - Close"
N O T E
on page 37).
on page 38 dialog box.