Agilent Technologies 1260Infinity II Bio-inert FractionCollector User Manual page 26

2
Site Requirements and Specifications
Performance Specifications
Table 3 Performance Specifications 1260 Infinity II Analytical Fraction Collector (G1364F)
Type Specification
Fraction Containers 30 x 48 mm (OD x L) tubes, ~20 mL / tube
25 x 48 mm (OD x L) tubes, ~15 mL / tube
16 x 48 mm (OD x L) tubes, ~11 mL / tube
12 x 48 mm (OD x L) tubes, ~8 mL / tube
Vials, well plates, capped vials, and well plates with closing mats can be
used as recommended by Agilent Technologies
Maximum tube height 48 mm with long needle assembly G1367-87200
75 mm with short needle assembly G1364-87202
Instrument Control LC and CE Drivers A.02.17 or above
Instrument Control Framework (ICF) A.02.04 or above
Instant Pilot (G4208A) with firmware B.02.22 or above
Lab Advisor B.02.10 or above
Communications Controller-area network (CAN), Local Area Network (LAN)
ERI: ready, start, stop and shut-down signals
Maintenance and Extensive diagnostics, error detection and display with Agilent Lab Advisor
safety-related software
features Leak detection, safe leak handling, leak output signal for shutdown of
pumping system, and low voltages in major maintenance areas
GLP features Early maintenance feedback (EMF) for continuous tracking of instrument
usage with user- settable limits and feedback messages.
Electronic records of maintenance and errors
Housing All materials recyclable.
1
max. height can be extended by using the short needle assembly G1364-87202
26 1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual
Comment
For details about
supported software
versions refer to the
compatibility matrix of
your version of the LC
and CE Drivers