Fraction Collector User Interface (Dashboard Panel) - Agilent Technologies 1260Infinity II Bio-inert FractionCollector User Manual

4
Preparing the Fraction Collector
Setting up the Fraction Collector with the Instrument Control Interface

Fraction Collector User Interface (Dashboard Panel)

Table 10 Fraction Collector User Interface
Parameter
76
Description
Module graphic
The items in the Fraction Collector graphic have the following meaning
and function:
• 1: Denotes collection to a fraction location. The current collection
location is shown to the right of the graphic.
• 2: Starts manual fraction collection. This button is active only during a
run where fraction collection is enabled.
• 3: Stops manual fraction collection. This button is active only during a
run where fraction collection is enabled.
Instrument Actuals
The following fraction collector actuals are displayed:
• Current location:
The fraction location currently in use.
• Fraction mode:
The current fraction mode.
• Rinse Status:
The status of the Rinse procedure
• Temperature:
G1364F and G5664B with thermostat configured. The fraction
thermostat temperature (in ° C). In the case of an FCC, the module
name is also displayed
1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual