8
Parts for Maintenance and Repair
List of Recommended Plates and Closing Mats
List of Recommended Plates and Closing Mats
Warnings
Explosive gas mixtures
WA R N I N G
There is a risk of explosive gas mixtures in the instrument if flammable solvents are
used.
➔
➔
➔
Contamination with adhesives
C AU T I O N
Closing mats with adhesives can give some contamination in the system. The
adhesive is soluble in most of the solvents used in HPLC.
➔
160
Cover the plates.
Remove the plates from the fraction collector after turning it 0FF.
Only use solvents with a flash point higher than 200 °C.
In general do not use closing mats with adhesive. The fraction collector has no
prepunch needle, therefore the adhesive will clog the needle after several
injections.
1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual