Flow Connections Of The Pump - Agilent Technologies 1260 Infinity VL User Manual

Flow Connections of the Pump

Tools required p/n
8710-0510
Parts required Description
Other modules
Parts from starter kits
Preparations Pump is installed in the LC system
Toxic, flammable and hazardous solvents, samples and reagents
WA R N I N G
The handling of solvents, samples and reagents can hold health and safety risks.
➔
➔
➔
1260 Infinity QuatPump VL User Manual
Description
Wrench open 1/4 — 5/16 inch
When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
The volume of substances should be reduced to the minimum required for the
analysis.
Do not operate the instrument in an explosive atmosphere.
Installing the Pump

Flow Connections of the Pump

3
39