Agilent Technologies 1260Infinity II Bio-inert FractionCollector User Manual page 45

3
Using the Module
Configuration and Operation of the Fraction Collector
Time
In the time section of the dialog box the Stoptime and the Posttime for the
fraction collector can be specified. By default the Stoptime is set to as pump
and the posttime is switched OFF.
Auxiliary
In the Auxiliary section the Maximum fill volume per location can be specified. If
as configured is selected, the pre-configured volume is used. This ensures that
the location (well, vial or tube) cannot be overfilled during fraction collection.
This volume can be further reduced by defining a customized volume.
1260 Infinity II Analytical-Scale & Bio-inert Fraction Collector User Manual 45