Table of Contents
Advertisement
About This Manual
The MVME2300 Series VME Processor Module Programmer's Reference
Guide provides board-level information and detailed ASIC information,
including register bit descriptions, for the MVME2300 and
MVME2300SC series of VME processor modules.
The MVME2300 series VME processor module is based on an MPC603
or MPC604 PowerPC microprocessor, and features dual PCI Mezzanine
Card (PMC) slots with front panel and/or P2 I/O. In addition, the
MVME2300SC versions of the board give both PMC slots access (via P2)
to an SCSA (Signal Computing System Architecture) backplane bus, if the
system supports one.
The MVME2300 series VME processor module is compatible with
optional double-width or single-width PMCs, and with the PMCspan PCI
expansion mezzanine module. By utilizing the two onboard PMC slots and
stacking PMCspan(s), the MVME2300SC can provide support for up to
six PMCs.
As of the publication date, the information presented in this manual applies
to the following MVME2300 and MVME2300SC models:
MVME2301
MVME2302
MVME2303
MVME2304
MVME2304-0111, -0113, MVME2305*
MVME2304-0121, -0121SC, -0123, MVME2306* 32MB ECC DRAM
MVME2304-0131, -0131SC, -0133, MVME2307* 64MB ECC DRAM
MVME2304-0141, -0141SC, -0143, MVME2308* 128MB ECC DRAM
MVME2306SC-1
MVME2307SC-1
Model
Memory
16MB ECC DRAM
32MB ECC DRAM
64MB ECC DRAM
128MB ECC DRAM
16MB ECC DRAM
32MB ECC DRAM
64MB ECC DRAM
Processor
MPC603
@ 200 MHz
MPC604
@ 300*/333
MHz
MPC604
@ 300 MHz
xix
Advertisement
Table of Contents
