Technical Documentation For The Oxylog 2000 Plus; According To Emc Standard Iec/En 60601-1-2; General Information - Dräger Oxylog 2000 plu Instructions For Use Manual

Technical Documentation for the Oxylog 2000 plus according to EMC
standard IEC/EN 60601-1-2

General Information

The EMC conformity of the Oxylog 2000 plus includes the use of following external cables, transducers
and accessories:
AC/DC power pack 100 - 240 V / 50 - 60 Hz
DC/DC Converter
All-round Wall holder
Carrying System
Refer to the "List of Accessories" on page 123 for additional information.
Additionally, accessories may be used, which do not affect EMC compliance, if no other reasons contradict
the use of them. The non-observance may result in increased emissions or decreased immunity of the
Oxylog 2000 plus.
The Oxylog 2000 plus should not be used adjacent to or stacked with other equipment; if adjacent or
stacked use is inevitable, the Oxylog 2000 plus should be observed to verify normal operation in the
configuration in which it will be used.
Instructions for Use Oxylog 2000 plus SW 1.n
Technical Data
113