Introduction - Mitsubishi Electric NZ2GF12A4-16D User Manual

INTRODUCTION

Thank you for purchasing the CC-Link IE Field Network waterproof/dustproof remote I/O module (hereafter abbreviated as I/O
module).
This manual describes the procedures, system configuration, parameter settings, functions, and troubleshooting of the I/O
module.
Before using this product, please read this manual and the relevant manuals carefully and develop familiarity with the
functions and performance of the I/O module to handle the product correctly.
When applying the program examples introduced in this manual to an actual system, ensure the applicability and confirm that
it will not cause system control problems.
 Relevant products
NZ2GF12A4-16D, NZ2GF12A4-16DE, NZ2GF12A2-16T, NZ2GF12A2-16TE, NZ2GF12A42-16DT, NZ2GF12A42-16DTE
Unless otherwise specified, this manual describes the program examples in which the remote I/O signals and
remote registers are assigned for an I/O combined module as follows.
• Remote input signal: RX0 to RX7
• Remote output signal: RY8 to RYF
• Remote register: RWr0 to RWrB, RWw0 to RWwB
For the assignment of remote I/O signals and remote registers, refer to the following.
 User's manual for the master/local module used
7