List Of Remote Register - Mitsubishi Electric NZ2GF12A4-16D User Manual

3.5

List of Remote Register

This section lists remote registers for a master/local module.
The following shows an assignment example of remote registers with the remote registers of the I/O module assigned to the
remote registers of RWr0 to RWrB and RWw0 to RWwB.
The remote registers are assigned in station-based units.
Remote register (RWr) is the information input from the I/O module to the master/local module.
Remote register (RWw) is the information output from the master/local module to the I/O module.
For details on the remote register, refer to the following.
Page 144 Details of Remote Registers
Do not read or write data from/to any "Use prohibited" remote registers. Doing so may cause an accident due
to incorrect output or malfunction.
Input module
Remote register (RWr)
Signal direction: Input module  Master/local module
Device Name
number
RWr0 Module status area
RWr1 Error code
RWr2 Warning code
RWr3 Function selection status flag
RWr4 Input X port status
RWr5 Use prohibited
RWr6 Use prohibited
RWr7 Use prohibited
RWr8 Use prohibited
RWr9 Use prohibited
RWrA Use prohibited
RWrB Use prohibited
For the output ON/OFF information hold function, refer to the following.
Page 91 Output ON/OFF Information Hold Function
3 SPECIFICATIONS
48
3.5 List of Remote Register
Remote register (RWw)
Signal direction: Master/local module  Input module
Device Name
number
RWw0 Module operation area
RWw1 Use prohibited
RWw2 Use prohibited
RWw3 Function selection setting flag
RWw4 Use prohibited
RWw5 Use prohibited
RWw6 Use prohibited
RWw7 Use prohibited
RWw8 Use prohibited
RWw9 Use prohibited
RWwA Use prohibited
RWwB Use prohibited