Appendix 3 Details Of Remote Buffer Memory Addresses - Mitsubishi Electric NZ2GF12A4-16D User Manual

Appendix 3
This section describes the details of remote buffer memory addresses of the I/O module.
Input response time setting
Set the input response time of the input module.
Input response time
0ms
0.5ms
1.0ms
1.5ms
5ms
10ms
20ms
70ms
■Remote buffer memory address
Name
Input response time setting
■Enabling the setting
Turn on and off Operation condition setting request flag (RWw0.b9) to enable the setting.
■Default value
The default value is 10ms (5H).
Output HOLD/CLEAR setting
Set whether to hold or clear the last status of each output for when the I/O module is disconnected from data link or the CPU
module is in STOP status.
Output HOLD/CLEAR setting
CLEAR
HOLD
■Remote buffer memory address
Name
Output HOLD/CLEAR setting
■Enabling the setting
Turn on and off Operation condition setting request flag (RWw0.b9) to enable the setting.
■Default value
The default value is CLEAR (0H).
APPENDICES
154

Appendix 3 Details of Remote Buffer Memory Addresses

Details of Remote Buffer Memory
Addresses
Setting value
0H
1H
2H
3H
4H
5H
6H
7H
Address
0000H
Setting value
0H
1H
Address
0001H