Chapter 2 Part Names - Mitsubishi Electric NZ2GF12A4-16D User Manual

2
PART NAMES
Part names of an I/O module
This section describes part names of the I/O module.
(1)
(2)
(3)
(4)
(5)
(6)
(1)
No. Name
(1) FG metal fitting
(2) Power supply connectors
(3) I/O connector
(4) Signal label
(5) Station number setting switch
(6) Communication
connectors
2 PART NAMES
16
Application
Metal fitting for connecting FG
For the tightening torque of screws for the FG metal fitting, refer to the following.
Page 68 Fixing the I/O module
Connectors for the module-and-sensor power supply (24VDC) and load power supply (24VDC)
Connector for I/O signals
Label for describing signal names
Rotary switch for setting a station number or tests
Page 64 Setting Switch
Page 131 Unit Test
P1 PORT1 connector for CC-Link IE Field Network
Connect an Ethernet cable. (Page 69 Wiring of Ethernet Cable)
P2 PORT2 connector for CC-Link IE Field Network
Connect an Ethernet cable. (Page 69 Wiring of Ethernet Cable)