The parameter is read from the I/O module.
Set "Method selection" to "Parameter write".
Set "Write Value". The following are the procedure.
• Click the title cell of "Read Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values.
Click the [Execute] button and the following window is displayed.
Click the [Yes] button.
The parameter is written to the I/O module.
The module parameter setting of the slave station is completed.
7 VARIOUS SETTINGS
7.2 Changing the Parameter