This chapter describes system configuration using an I/O module.
For CC-Link IE Field Network configuration, refer to the following.
User's manual for the master/local module used
Applicable master station
When using an I/O module, use the following products as a master station.
Information on "Applicable master station" described above is the ones at the point when this manual was issued.
For latest information, please visit the website of CC-Link Partner Association.
Use a general-purpose Ethernet cable that meets the 1000BASE-T standard.
Consider the operating environment when selecting available cables that satisfy the product specifications.
The following software is available for settings and diagnostics of the I/O module. ( Manuals of each software)
To use the parameter setting function of an I/O module, the profile is required.
When the latest profile of the remote I/O module is necessary, please consult your local Mitsubishi representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of devices supporting
the CC-Link family.
A module is added to "Module List" of "CC IE Field Configuration" window by profile registration to an engineering tool. For the
profile registration, refer to the operating manual for the engineering tool used.
5 SYSTEM CONFIGURATION
5.1 Applicable Systems
Function and application
Software for system design, programming, debugging, and maintenance of the programmable controller.
First five digits of serial number
"14102" or later
"14111" or later