Setting the fast logic function
In the fast logic setting, the combination of input signal A and B, and their output conditions for each output signal is fixed.
When the input OFF delay function is used, a fast logic output is executed using the X signal for which the input OFF delay
process has been executed.
■Combinations of output conditions and input signals for each output signal
• X0 to X7: Input signals of the I/O combined module
• Y8 to YB: Output signals of the I/O combined module
Fast logic setting Y8
Fast logic setting Y9
Fast logic setting YA
Fast logic setting YB
Set "Method selection" to "Parameter write".
"CC IE Field Configuration" window Select an I/O module in "List of stations". [CC IE Field Configuration]
[Online] [Parameter Processing of Slave Station]
Set whether to enable or disable the fast logic function in "Fast logic setting Y".
Fast logic setting Y
*1 Each module has the same item and setting range.
8.10 Fast Logic Function
Logic (output condition)
(When both the input signal A and B turn on,
Output signal Y is output.)
OR (When either of the input signal A or B
turns on, Output signal Y is output.)
Output signal Y
• 0: Disable
• 1: Enable