Mitsubishi Electric NZ2GF12A4-16D User Manual page 158

Number of ON times integration function enable
Set whether to enable or disable the number of ON times integration function.
b15 b14 b13
YF YE YD
0: Disable
1: Enable
*1 The use of these bits is prohibited for the NZ2GF12A42-16DT and NZ2GF12A42-16DTE.
■Remote buffer memory address
Name
Number of ON times integration function enable
■Enabling the setting
Turn on and off Operation condition setting request flag (RWw0.b9) to enable the setting.
■Default value
The default value is Disable (0).
Input OFF delay setting
Set whether to enable or disable the input OFF delay function and set the delay time.
■Input OFF delay setting X0 (address: 0110H to 0111H)
Address b15
0110H Lower 16 bits of delay time
0111H Higher 16 bits of delay time
■Remote buffer memory address
Name
Input OFF delay setting X
*1 The use of 0120H to 012FH is prohibited for the NZ2GF12A42-16DT and NZ2GF12A42-16DTE.
■Setting range
Setting range is No delay (0) or 400s to 60s (1 to 150000). Set the values in increments of 400s.
■Enabling the setting
Turn on and off Operation condition setting request flag (RWw0.b9) to enable the setting.
■Default value
The default value is No delay (0).
If a value out of the setting range above is set, the error code (0503H) is stored in Error code (RWr1), Error
status flag (RWr0.b10) turns on, and the ERR. LED turns on. Then the I/O module stops the I/O operation.
APPENDICES
156
Appendix 3 Details of Remote Buffer Memory Addresses
b12 b11 b10
YC YB YA
b14 b13 b12 b11
*1
b9 b8 b7 b6
Y9 Y8 Y7 Y6
Address
0102H
b10 b9 b8 b7
Address
0110H to 012FH
*1 *1 *1 *1
b5 b4 b3
Y5 Y4 Y3
b6 b5 b4 b3
*1
*1 *1 *1
b2 b1 b0
Y2 Y1 Y0
b2 b1 b0