Mitsubishi Electric NZ2GF12A4-16D User Manual page 109

Setting procedure
Connect GX Works2 to the master station to configure the setting.
1.
Create a project on GX Works2.
For "Series", select "QCPU (Q mode)" and for "Type", select "Q10UDH".
[Project]  [New...]
2.
Display the network parameter setting window and configure the setting as follows.
Project window  [Parameter]  [Network Parameter]  [Ethernet/CC IE/MELSECNET]
3.
Display the "CC IE Field Configuration" window and configure the configuration and station number of the slave station
as follows.
[CC IE Field Configuration Setting] button
9 PROGRAMMING
107
9.3 Program Example
9