Download  Print this page

Mitsubishi Electric NZ2GF12A4-16D User Manual Page 148

Cc-link ie field network waterproof/dustproof remote i/o module.
Hide thumbs

Advertisement

■Operation condition setting completion flag (RWr0.b9)
After writing parameter data to the remote buffer memory with the REMTO instruction, turn on Operation condition setting
request flag (RWw0.b9). After the operating condition is changed, Operation condition setting completion flag (RWr0.b9) turns
on. When the following settings are changed, the flag is used as a trigger condition to turn Operation condition setting request
flag (RWw0.b9) on and off.
• Input response time setting (address: 0000H)
• Output HOLD/CLEAR setting (address: 0001H)
• Cyclic data update watch time setting (address: 0002H)
• Initial operation setting (address: 0004H)
• Number of ON times integration function enable (address: 0102H)
• Input OFF delay setting X (address: 0110H to 012FH)
• Fast logic setting Y (address: 0120H to 0127H)
*1
Module power supply
Initial processing request flag
(RWr0.b8)
Initial processing completion
flag (RWw0.b8)
Operation condition setting
completion flag (RWr0.b9)
Operation condition setting
request flag (RWw0.b9)
Parameter area
Remote READY (RWr0.b11)
*2
External input signal X0
RX0
*1 When data link starts at the same time of when the module is powered on
*2 When an external input device connected to X0 is on
(1) Setting values are read from the internal nonvolatile memory.
(2) The operation starts with the setting value A.
(3) The setting value is changed by users.
(4) The operation starts with the parameter setting value B.
APPENDICES
Appendix 2 Details of Remote Registers
Controlled by the I/O module
Controlled by the program
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
(1)
(Setting value A)
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
(3)
(2)
OFF
OFF
OFF
ON
OFF
OFF
(Setting value B)
(4)
ON
ON
ON

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric NZ2GF12A4-16D

Comments to this Manuals

Symbols: 0
Latest comments: