Appendices; Appendix 1 Details Of Remote I/O Signals; Remote Input Signal; Remote Output Signal - Mitsubishi Electric NZ2GF12A4-16D User Manual

APPENDICES

Appendix 1
The following describes the details of the remote I/O signals assigned to the master/local module.
The assignment of each device number is for the case when the remote I/O signals of the I/O module are assigned as follows.
Item

Remote input signal

Remote output signal

Remote input signal
External input signal
This signal shows the on/off state of each of external inputs (X0 to XF) of the input module. However, when the input OFF
delay function is enabled, the on/off state of each of the actual external inputs (X0 to XF) and that of External input signal X
(RX0 to RXF) may not match. For details on the input OFF delay function, refer to the following.
Page 84 Input OFF Delay Function
Remote output signal
External output signal
This signal turns on or off each of external outputs (Y0 to YF) of the output module. However, when the fast logic function is
enabled, the on/off state of External output signal Y (RY0 to RYF) and that of each of the actual external outputs (Y0 to YF)
may not match. For details on the fast logic function, refer to the following.
Page 95 Fast Logic Function
Details of Remote I/O Signals
I/O module
RX0 to RXF
RY0 to RYF
APPENDICES

Appendix 1 Details of Remote I/O Signals

A
143