Mitsubishi Electric NZ2GF12A4-16D User Manual page 85

Method for clearing an error by executing the command of the slave station
The following shows how to clear an error by executing the command of the slave station.
(1) List of stations
1.
(1)
2.
3.
4.
5.
Select the I/O module in "List of stations" on the "CC IE
Field Configuration" window.
Open the "Command Execution of Slave Station"
window.
[CC IE Field Configuration]  [Online]  [Command
Execution of Slave Station]
Set "Method selection" to "Error clear request" and click
the [Execute] button.
In the window that appears (shown left), click the [OK]
button.
The error for the I/O module is cleared.
8.1 Error Notification Function
8
8 FUNCTIONS
83