Mitsubishi Electric NZ2GF12A4-16D User Manual page 118

Program example
1.
Create the following program with GX Works2.
2.
Write the program to the CPU module of the master station, and reset the CPU module, or turn off and on the power
supply.
3.
Put the CPU module of the master station into RUN.
9 PROGRAMMING
116
9.5 Program Example for the Fast Logic Function
Input response time setting (address:
0000H): 1.0ms (2H)
Output HOLD/CLEAR setting (address:
0001H): CLEAR (0H)
Cyclic data update watch time setting
(address: 0002H): 200ms
Fast logic setting Y8 (0120H, 0121H):
Enable (8000H)
Fast logic setting Y9 (0122H, 0123H):
Enable (8000H)
Write the station-based parameter.
Write the fast logic setting.
The station-based parameter writing is
normally completed.
The I/O combined module parameter
writing is normally completed.
Turn on Operation condition setting request
flag (RWw0.b9).
Turn off Operation condition setting request
flag (RWw0.b9).
Turn on Initial processing completion flag
(RWw0.b8).
Turn off Initial processing completion flag
(RWw0.b8).