Mitsubishi Electric NZ2GF12A4-16D User Manual page 165

Cc-link ie field network waterproof/dustproof remote i/o module
Table of Contents

Advertisement

Module operation information initialization command
The module operation information stored in a nonvolatile memory is initialized.
The module operation information can be initialized only when Nonvolatile memory data error (module operation information)
has occurred.
b15
b14
b13
b12
0 (fixed)
(1) 0: Not commanded, 1: Commanded
■Remote buffer memory address
Name
Module operation information initialization command
■Operation of the module operation information initialization
When Module operation information initialization command (address: 1004H) is set to Commanded (1), the module
information is initialized.
Error data of module operation
Module operation information
initialization command
(address: 1004H)
Module operation information
initialization completed
(address: 1005H)
■Default value
The default value is Not commanded (0).
Module operation information initialization completed
This remote buffer memory area shows whether initialization of the module operation information stored in a nonvolatile
memory is completed or not.
b15
b14
b13
b12
0 (fixed)
(1) 0: Not performed, 1: Completed
■Remote buffer memory address
Name
Module operation information initialization completed
■Operation of the module operation information initialization
When initialization of the module operation information is completed, Module operation information initialization completed
(address: 1005H) is turned to Completed (1).
For the timing of turning the bit to Not performed (0)  Completed (1)  Not performed (0), refer to the following.
Page 163 Module operation information initialization command
■Default value
The default value is Not performed (0).
b11
b10
b9
b8
Controlled by the I/O module
Controlled by the program
Module operation information
Not commanded (0)
Not performed (0)
b11
b10
b9
b8
b7
b6
b5
b4
Address
1004H
Commanded (1)
Completed (1)
b7
b6
b5
b4
Address
1005H
Appendix 3 Details of Remote Buffer Memory Addresses
b3
b2
b1
b0
(1)
Default value
Not commanded (0)
Not performed (0)
b3
b2
b1
b0
(1)
APPENDICES
A
163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents