Millipore Spectroquant Multy Operating Manual page 38

en
40
The display shows:
Enter the password: [1] [7] [0] [9] [1] [9] [9] [1].
Confirm by pressing [Enter].
The display shows:
Press the [1] key.
The display then shows:
Press the [0] key.
The LED parameters are now determined. The unit displays the
wavelength in operation, and shortly thereafter "LED-Opt. o.k."
if the determined parameter is correct.
When all the LEDs have been processed the display shows:
Confirm by pressing [Enter].
The display then shows:
Press the [Esc] key.
The unit continues to run normally. Now switch off by pressing
the [On/Off] key.
Thereafter the unit can be used as usual.
<Service Menu 01>
Password:
<Service Menu 01>
1: LED-Optim.
cancel: ESC
<LED-Optim.>
0: alle LEDs
1: LED wählen
cancel: ESC
<LED-Optim.>
LED Opt. o.k.
weiter mit
<Service Menu 01>
1: LED-Optim.
cancel: ESC