Millipore Spectroquant Multy Operating Manual page 227

5.3.3 Printing measurement results
from a defined date range
In this mode all measurement results from a defined period
of time are printed out.
If you wish to print out only one day's test results, enter the
same date for both the start and end dates.
Press the keys [Mode] [2] [1] in succession.
Confirm your selection by pressing [Enter].
The display now shows:
Enter the start date in the sequence year, month, day
e.g. July 14, 2006 = [0][6] [0][7] [1][4].
Confirm by pressing the [Enter] key.
The display now shows:
Enter the end date in the sequence year, month, day
e.g. July 19, 2006 = [0][6] [0][7] [1][9].
Confirm by pressing the [Enter] key.
The display now shows:
Pressing the [Enter] key prints out the saved test results from
the defined period of time.
After the printout operation the colorimeter returns to the
mode menu.
< Print>
sorted:date
from yy-mm-dd
__-__-__
< Print>
sorted:date
to yy-mm-dd
__-__-__
< Print>
sorted:date
from 2006-07-14
to 2006-07-19
Start:
Ende:ESC
Chapter 5.3 | Page 4 of 6